Giving you access you multiple metering options including a wide range of customization, the DP Meter Pro Audio Meter and Side-Chaining Plug-In from Blue Cat Audio features peak, RMS, and crest factor meters in addition to side-chaining control capabilities via MIDI and automation outputs. 5 different metering scales, including Bob Katz’s K-System are included by default, with support for creation of your own scales. Your track’s statistics are visualized in colored displays with histograms to track its progress over time.

The DP Meter Pro is compatible with mono, stereo, and surround tracks, and features a mid/side switch to check mono and stereo field compatibility. All envelopes can be reused for monitoring or side-chaining applications, recorded as automation curves, or sent as MIDI CC messages.

Providing multiple dynamics processing options in a single plug-in, the Dynamics All-In-One Dynamics Processing Plug-In from Blue Cat Audio can function as a compressor, limiter, gate, expander, and waveshaper. It features a dual-threshold system that allows for intricate dynamic response control, along with a wet/dry knob that allows for parallel processing without the need for creating auxiliary tracks.

Further control is provided via an input filter as well as a side-chain input for triggered compression or gating, while the selectable VCA/Opto and peak/RMS controls allow you to dictate how the compression will react to your source audio. Additionally, mid/side processing and multiple stereo linking options help you customize the control of stereo material. The plug-in is Mac and Windows compatible and requires VST, AU, RTAS, AAX, or DirectX compatible host software.

Allowing you to compare the spectral analysis of several tracks at once, the FreqAnalyst Multi Spectral Analysis Tool Plug-In from Blue Cat Audio gives you the ability to see which parts of the spectrum individual instruments in your mix use. Its Diff view allows you to compare the spectrum of several instances, which can be used for EQ matching or curve response management.

The plug-in’s precision and rate can be managed by applying an offset or slope to the measured spectrum, while 3 performance modes give you the choice between instant, peak, or average response, depending on your needs. The spectrogram itself can be set to 2D or 3D operation, with the later providing a waterfall mode in display. The display for all modes support zooming, allowing you to hone in on exact areas for critical analysis. The inclusion of 4 memory slots allows you to compare multiple tracks. The plug-in is available in VST, AU, RTAS, AAX, and DirectX formats on Mac and Windows.

With performance that can be switched between multiple detail views and display modes, the FreqAnalyst Pro Spectral Analysis Tool and Automation Generator Plug-In from Blue Cat Audio provides real-time analysis with adjustable attack and release parameters. Additionally, it features output parameters that can generate MIDI CC messages for control of other effects in real time.

The plug-in ‘s precision and rate can be managed by applying an offset or slope to the measured spectrum, while 3 performance modes give you the choice between instant, peak, or average response, depending on your needs. The spectrogram itself can be set to 2D or 3D operation, with the later providing a waterfall mode in display. The display for all modes support zooming, allowing you to hone in on exact areas for critical analysis. The inclusion of 4 memory slots allows you to compare multiple tracks. The plug-in is available in VST, AU, RTAS, AAX, and DirectX formats on Mac and Windows.

Providing equalization with very low latency and no phase distortion, the Liny EQ 8-Band Linear EQ Plug-In from Blue Cat Audio is designed for critical mixing and mastering applications. It features multiple filter shapes allowing for creation of unique EQ curves based on your needs, as well as stereo and mid/size modes. To help create highly accurate EQ curves, the Liny EQ provides you with spectrum analyzer and spectrogram display views. The plug-in supports VST, AU, RTAS, AAX, and DirectX plug-in formats on Mac and Windows.

Giving you access to multiband compression, limiting, gating, and expansion in addition to a waveshaper, the MB-5 Dynamix Multiband Dynamic Processing Plug-In from Blue Cat Audio allows you to use those modules independently or combined, splitting them up between frequency bands if desired. Additionally, internal side-chaining abilities allow you to use parameters from one effect to control parameters of another. For final dynamics control, there is an output brickwall limiter and clipper available.

Visual feedback is provided via input and output level meters for each channel, as well as through a spectral meter. The plug-in also has MIDI and automation output capabilities allowing it to control parameters of other plug-ins. It supports VST, AU, RTAS, AAX, and DirectX formats on Mac and Windows.

Giving you the ability to split up a track into multiple frequency bands, and then load up to 4 VST or AU plug-ins on each for frequency-specific processing, the MB-7 Mixer Multiband Mixing Console and VST/AU Host Plug-In from Blue Cat Audio features a fader with bypass, mute, or solo functions for each band. When on a stereo track, you also have access to the stereo width and position in the stereo field.

The VST or AU plug-ins can be loaded pre or post fader with latency compensation, and can be individually bypassed for comparison listening. It also features MIDI and automation input capabilities, and can be used for side-chaining features as well. It supports VST, AU, RTAS, AAX, and DirectX host software on Mac and Windows.

Allowing you to visualize multiple audio tracks simultaneously on the same screen, the Oscilloscope Multi Waveform Visualize and Comparator Plug-In from Blue Cat Audio provides real-time waveform rendering for comparative purposes. By displaying the waveforms of multiple tracks at once, you can use the plug-in to check for phase issues and mono compatibility between tracks as well as on your mix. Its histogram display provides the ability to observe the average peak level as well.

4 available memory slots allow you to store any waveform for comparisons between multiple set ups or sessions. It is compatible with VST, AU, RTAS, AAX, and DirectX plug-in formats on Mac and Windows.

Providing you with the ability to host VST or AU plug-ins in an RTAS or AAX environment, the PatchWork Virtual Patchbay for Audio Plug-Ins from Blue Cat Audio can host up to 64 VST or AU plug-ins in a single instance. For versatility, it can operate as either an audio plug-in or virtual instrument, allowing to load both instruments and effects. Up to 8 parallel chains can be activated independently, allowing you to create an effects chain without the need for multiple busses.

Each slot features latency compensation, presets management, undo/redo, and an independent bypass. Thanks to PatchWork’s mapping capabilities, third party plug-ins can be automated.

The StereoScope Pro 3D Stereo Image Analysis Plug-In from Blue Cat Audio is designed for use as a real-time stereo field analyzer and features the ability to display the evolution of your stereo image in either 2D or 3D waterfall views. For precision monitoring, the display can be zoomed in on, while 4 available memory slots allow you to compare multiple tracks. The generated envelope of your stereo track can be used as output MIDI CC data, allowing the StereoScope Pro to be used to control automation on other plug-ins. It supports VST, AU, RTAS, AAX, and DirectX formats on Mac and Windows.

Designed to sit on your master bus of your DAW to protect against the occasional level clip, the Protector Brickwall Limiter Plug-In from Blue Cat Audio is capable of limiting your general volume while increasing the perceived loudness of your track thanks to its transparent frequency response. While it is intended for straightforward operation, it is also capable of a range of sounds including creative applications such as distortion, track pumping, or heavy limiting.

The Protector’s interface provides feedback via colored meters with dynamic histograms. A side-chain input allows you to tweak the plug-in’s performance while its MIDI CC output lets you use the Protector to control other effect parameters. It supports VST, AU, RTAS, AAX, and DirectX formats on Mac and Windows.

Allowing you to control multiple third-party MIDI-controllable plug-ins from a single user interface, the Remote Control Software MIDI Controller from Blue Cat Audio consists of 3 plug-ins, the Remote Control 16, Remote Control 32, and Remote Control 64, offering the ability to manage 16, 32, or 64 parameters respectively. Additionally, the software can be used to provide control over complicated external hardware MIDI devices.

Each controller can be assigned a MIDI channel and CC number as well as a customized response curve. The software can also be used for MIDI control remapping and transformation, with the ability to assign an input parameter a given MIDI CC while assigning the associated output parameter to another MIDI CC with different response curve parameters.

The Remote Control’s skin can be customized from a selection of included options, or through the ability to design your own, allowing you to tweak the GUI appearance to your needs and taste. The software is Mac and Windows compatible and will work as a DirectX, VST, AU, RTAS, or AAX plug-in.

The StereoScope Multi Multiple Track Stereo Image Analysis Plug-In from Blue Cat Audio provides you with real-time stereo field analysis of several tracks, allowing you to compare between your session and reference tracks. It features the ability to display the evolution of your stereo image in either 2D or 3D waterfall views. For precision monitoring, the display can be zoomed in on, while 4 available memory slots allow you to compare multiple tracks. The generated envelope of your stereo track can be used as output MIDI CC data, allowing the StereoScope Multi to be used to control automation on other plug-ins. It supports VST, AU, RTAS, AAX, and DirectX formats on Mac and Windows.