The MAutoDynamicEq from MeldaProduction is an equalizer plug-in featuring seven, variable-slope, resonance-less dynamic filters that can do common tasks such as de-essing, ducking, compression, expansion, in addition to equalization. Flexible high-pass and low-pass filters are also available for speeding up the mixing workflow.

No latency spectral matching is available with simple source, target selection for automatic equalization. Tasks such as de-essing or bass drum enhancement are performed with a simplified four-knob interface. Visualization not only shows the results of the processing, but also features an integrated analyzer, sonogram, spectrum areas, plus more. Side-chain access provides additional functionality.

The MDynamicEq from MeldaProduction is an equalizer plug-in featuring five, variable-slope, resonance-less dynamic filters that can do common tasks such as de-essing, ducking, compression, expansion, in addition to equalization. Flexible high-pass and low-pass filters are also available for speeding up the mixing workflow.

Tasks such as de-essing or bass drum enhancement are performed with a simplified four-knob interface. Visualization not only shows the results of the processing, but also features an integrated analyzer, sonogram, spectrum areas, plus more. Side-chain access provides additional functionality.

MAutoAlign from MeldaProduction is a plug-in for dealing with issues of phase cancellation that can occur when a source is recorded with more than one microphone. Although these issues can be resolved manually by shifting tracks, MAutoAlign can do so easily with a click of a button. The software finds ideal delays and phase inversions automatically, and only delays each track and potentially inverts the phase of some of them.

No filtering is done that would alter the signal in any way and no complicated routing or side-chaining is required. Additional functions include 16x upsampling, M-S and surround support as well as other channel modes, A-H presets are available for easy comparisons, along with an integrated help system.

MCompare from MeldaProductions is a plug-in designed to help mixing and mastering engineers reference both other audio sources and various stages of a particular audio workflow, such as a dry mix to a later version. This is important since, although increasing loudness of an audio source may feel like it sounds better, acoustic errors in the spectral and spatial balance could be masked by the loud wall of sound. Comparing tracks is simple and the software compensates for any latency that might be present. Additionally, the level of a reference track can be lowered automatically to compare it with the user’s audio.

MSpectralDynamics from MeldaProduction is a dynamics plug-in that functions in the spectral domain allowing the user to work with individual frequencies such as, for example, making loud frequencies quieter. The software can do anything with each frequency including compression, expanding, gating, or any combination, with the added ability of drawing a custom processing shape for more creative effects.

A level follower provides automatic release modes, peak hold, RMS length, look-ahead, custom attack and release shapes and more. Other functions include integrated parallel compression, full channel linking, up to eight channel surround processing, while spectral side-chain processing aids in keeping tracks from masking each other.

The MDynamics from MeldaProduction is a single-band dynamics processing plug-in that can function as compressor, expander, gate, or any combination of the three. Additionally, a versatile envelope follower can adapt to any audio material and features automatic release modes, peak hold, RMS length, look-ahead, psycho-acoustic pre-filtering, custom attack and release shapes, spectral smoothing, and more.

Other features include integrated parallel compression, adjustable channel linking, and up to eight channel surround processing. The software not only follows the input level, it can filter it, or use any other signal from the side-chain. A simple band-pass or a fully-featured 6-band equalizer can be used for filtering.

The MLimiterX from MeldaProduction is a plug-in designed to provide transparent limiting, while also featuring a saturator for adding flavor if required. Four knobs provide all the control needed to make recordings loud without any ugly artifacts, with the drive knob adding character. Other features include psycho-acoustic pre-filtering, custom attack and release shapes, spectral smoothing, and more, with advanced visualization providing immediate feedback as to how loud the results are.

MMultiBandDynamics from MeldaProduction is a versatile multiband dynamics plug-in that can split the input into six bands, providing analog crossovers with up to 120 dB/octave separation, along with linear-phase and hybrid crossovers. Each band can be a compressor, expander, gate, any combination of the three, or a custom processing shape can be drawn for more creative effects.

A level follower provides automatic release modes, peak hold, RMS length, look-ahead, psycho-acoustic pre-filtering, custom attack and release shapes, spectral smoothing and more. Each band can utilize a different follower function. Other functions include integrated parallel compression, full channel linking, and up to eight channel surround processing.

The software not only follows the input level, it can filter it or use any other signal from the side-chain. For filtering a simple band-pass filter or a fully-featured 6-band equalizer are available. Again each band can be set up differently.

The MModernCompressor from MeldaProduction is a dynamics processing plug-in that features the typical parameters found in other compressors, but also adds a level distribution graph, from which the plug-in can setup compressor parameters automatically. Additionally, an envelope follower features RMS length, look-ahead, fully featured 6-band equalizer filtering, psycho-acoustic pre-filtering, spectral smoothing, and more.

MStereoProcessor from MeldaProduction is a multiband stereo analyzer and enhancer plug-in, useful for mastering and mixing. It features four bands and three crossover types, with each band providing width control and an exciter for delivering additional clarity. Analyzers provide an accurate view of the stereo output profile, focusing on width and stereo image integrity, while audio previewing checks for mono compatibility. Additional functions include 16x upsampling, M/S and surround support as well as other channel modes, A-H presets for easy comparisons, and an integrated help system.

The MMultiBandTransient from MeldaProduction is a plug-in that detects transients in audio files and allows for bringing them up or down. Additionally, it’s possible to adjust their texture using a saturation system, which can add analog character. Four modulators can control any set of parameters, including other modulators, with each modulator working as an LFO, level follower, MIDI/audio triggered ADSR enveloper, randomizer or pitch detector, or any combination thereof, while also being able to listen to the side-chain.

The MMultiBandLimiter from MeldaProduction is a plug-in designed to maximize loudness, while also featuring a saturator for adding flavor if required. Additionally, the software performs spectrum balancing which also benefits the quality of the output. Four knobs provide all the control needed to make recordings loud without any ugly artifacts. Other features include psycho-acoustic pre-filtering, custom attack and release shapes, spectral smoothing, and more.

MUltraMaximizer from MeldaProduction is an easy-to-use multiband loudness maximizer that, apart from raising the loudness of a track, provides a flattened spectrum and added warmth. The company’s saturation system can impart a pleasant analog character to the music while increasing loudness. Additional functions include 16x upsampling, M/S and surround support as well as other channel modes, A-H presets for easy comparisons, and an integrated help system.

MAutoEqualizer from MeldaProduction is a transparent and musical sounding equalizer plug-in featuring the company’s automatic equalization technology and linear-phase engine. Once a track is analyzed, the software sets up the bands and processes the audio with no latency. The linear-phase processing algorithm has been tweaked to provide overall quality, especially in the low frequency domain. The plug-in not only shows the results of its processing, but also features integrated analyzer, sonogram, spectrum areas, and more.

MFreeformAnalogEq from MeldaProduction is an EQ plug-in that borrows the company’s filter-adaptation technology to allow the free form drawing of filter curves over a parametric equalizer. The user draws a desired shape and the software finds the most accurate settings for the parametric filters. The plug-in not only shows the results of its processing, but also features integrated analyzer, sonogram, spectrum areas, and more. Additional functions include 1x to 4x upsampling, M/S and surround support as well as other channel modes, A-H presets for easy comparisons, and an integrated help system.

MEqualizerLinearPhase from MeldaProduction delivers eight bands of linear phase equalization, with particular attention given to the accuracy of low frequency adjustment. Visualization via the user interface not only shows the results of the processing, but also features an integrated analyzer, sonogram, spectrum areas, and more.

The MMultiBandConvolution from MeldaProduction is a convolution reverb plug-in capable of recreating realistic reverbs, microphone and box simulations, and even other plug-ins. A file manager displays the internal Impulse Response (IR) library, while the global file system allows for choosing custom IR libraries. The plug-in loads WAV, FLAC and MP3 files, recognizes multichannel wave files, and even combines multiple files together for multichannel usage with several topologies such as true-stereo.

The length of the impulse responses is only limited by the host CPU. Each band can have two IR generators of any type, file, reverb or filter, and a simple slider controls the ratio between the two to create realistic reverbs. Extensive modulation is possible using multiple modulation sources, with each modulator being able to work as an LFO, audio level follower, envelope generator, randomizer, or pitch detector. Attaching the slider to one of the modulators makes this simple process completely automatic.