Get maximum processing flexibility with minimum space required with the Nomad E Channel, an essential channel strip that packs five processors in one plug-in featuring an easy-to-use interface.

The E Channel offers a 3-band parametric EQ with high-/low-shelf filters and high-/low-pass filters, peak or RMS compression (pre- or post-EQ), de-esser (with selectable high-pass or band-pass filter), noise gate, and brickwall limiting. Additional features include L/R swap and phase inversion (both or L/R channels individually), and Mode selection.

Sculpt the fine detail out of your raw digital audio with the Nomad E Graphic EQ, a 15-band graphic equalizer plug-in with an easy-to-read VU meter. Adjustable bandwidth Q and a brickwall limiter allow for precise control over each audio channel.

Maximize the levels of any mixing or mastering project with the Nomad E Maximizer, an easy-to-use loudness maximizer plug-in that delivers lookahead, peak, and brickwall limiting to increase the apparent level of your tracks.

Input levels are individually adjustable for the left and right channels. Lower the Threshold to engage the limiter, and the output levels are automatically increased to compensate for the attenuation. Set the Release to yield smooth limiting. Use the Out Ceiling to cap the maximum output at a safe level. Left and right VU meters round out the feature list.

Add a wide range of vocal effects to your tracks with Nomad E RetroVox, an easy-to-use vocal processor plug-in that combines a Vinylizer effect with a Retro-Vox effect. In addition to a Gate and Compressor, E RetroVox offers Tone controls and high-/low-pass filters. Effects such as Gramophone, tape simulation, or the midrange phone voice can be created with the Vinylizer processor, which generates the warm sound and drive of old vinyl records. You can even add vinyl pops and clicks and at various speeds like 33 or 78 rpm.

Other features include an easy-to-use interface with a VU meter, Bass, and Treble controls, Brickwall Limiter, and V-Mix, which blends the output of the Vinylizer with the non-Vinylized signal.

Combat digital brittleness an add some analog warmth and drive to your tracks with the Nomad E TubeTape Warmer, an easy-to-use plug-in that emulates the sounds of tube circuitry and analog tape saturation. Engage the 12AX7 tubes (A or B) and increase the drive control individually for extra bite. You can independently add the sound of analog tape rolling at either 30 or 15 ips. Use the Tone control to dial in just the right amount of high or low frequencies and emphasize the added warmth. The easy-to-use interface features two VU meters that let you monitor your input and output levels simultaneously.

The Nomad E-3B Compressor brings together all the vital controls of multiband compression within a single plug-in with an easy-to-use interface. Offering 3-band compression, brickwall limiting, L/R swap, and Curve Mode EQ, this compressor is a powerful and flexible tool ideal for any mixing or mastering project.

Move the crossovers to define the frequency bands, adjust the gain, add compression, and Solo each band individually to tweak your sound with a high level of precision.

Make your tracks sound loud, punchy, and exciting with the Nomad E-3B Maximizer, a multiband loudness maximizer plug-in great for mastering applications and mixing applications. The multiband maximizer offers three frequency bands of lookahead brickwall limiting to precisely control and maximize the output levels of your recordings. Input levels are individually adjustable for low, mid, and high bands, and the crossover points can be moved to accurately define the frequency bands.

Lower the Threshold to engage the limiter, and the levels are automatically increased to compensate for the attenuation. Set the release to produce smooth limiting. Once you have set the right amount of limiting/attenuation, you can even add more level to the output.

An integral part of any studio toolkit, the Nomad E-Compressor packs several compressors in one plug-in. Choose between analog or digital compression, and Peak or RMS compression. The easy-to-use interface provides intuitive control over the Threshold, Ratio, Attack, Release, and Make-Up gain.

The E-Compressor also enables adjustment of the Threshold and Ratio parameters within a graphical display. Other features include brickwall limiting and individual input- and output-level controls.

Raise the level of your tracks without increasing unwanted noise in the audio with the Nomad E-Gate Expander, an essential noise-gate and expander plug-in with an easy-to-use interface.

This fully adjustable gate allows control of threshold, attack, hold, release, and range. Left and right VU meters and controls for input and output round out the feature list.